iFolio Documentation

Introduction

This document covers the installation and use of this template and often reveals answers to common problems and issues – we encourage you to read this document thoroughly if you need an in-depth guide on how to use the template.

If you have any questions that are beyond the scope of this document, feel free to ask via ticket support system: Ticket System

To get access to the ticket system, create an account on this page: Create an Account

Installation

The section will help you with steps to install JL Ifolio template – Quickstart and Manual installation.

Which installation method you should use depends on the current status of your site. Also, before installing either the template manually or the Quickstart Package, please make sure you meet the Joomla! and the template requirements.

JL Ifolio template is built on Gantry 5 Framework so it requires Gantry 5 Framework to be installed and enabled in your system.
You can download the gantry 5 framework here http://gantry.org/downloads#joomla Download Gantry 5 Framework

Requirements

JL Ifolio template is native with Joomla 3. Please make sure your system meets the following requirements:
  • Apache 2.2+ or Microsoft IIS 7 (Apache strongly recommended)
  • PHP 5.4+ (PHP 5.5+ Recommended)
  • MySQL 5.1+
  • Joomla 3.4+

Also, please have a look at the Gantry5 requirements. Basically, they are the same as the above, but you will find some additional details there.

Quickstart Installation

Why Quickstart

The quickstart allows you to replicate JL Ifolio demo to your server. It means, after install the quickstart, you will have a site exactly the same as the demo site.

Download JL Ifolio quickstart package →, upload to your server and extract it.

Step 1 Configuration: add Site name, Admin email, Admin username and password

Step 2 Database: select database type, host name, database username, password, database name & table prefix

Step 3 Remove/Rename “installation” folder: for security purpose, you need to rename or remove the “installation” folder

Detail documentation with screenshots


Manual Installation

Manual Installation refers to installing the template on your Joomla! powered website. This means you already have a website with content items, modules, extensions, so you just decided you want to improve the design of your website.

You can find step-by-step instructions as well as a video instructions regarding the Manual Installation in the Gantry5 Documentation, in the “Installation” chapter.

Install Gantry 5 Framework

Step 1 Install Gantry 5 Framework

From your back-end setting panel, go to: “Extensions → Extension Manager”, browse Gantry 5 plugin installation package then hit the “Upload and Install” Install gantry 5
Install JL Ifolio template
From your back-end setting panel, go to: “Extensions → Extension Manager”, browse JL Ifolio template installation package then hit the “Upload and Install” install joomla template

Step 2 Set default template style

Go to: “Extensions → Template Manager”, set JL Ifolio template style as your default template style.

Update

Updating the template

Updating the template is really easy. Here are the steps you need to perform:

  1. Download the new version of the template from the “Download” section on our website
  2. Go to “Extensions” -> “Manage” and click on the “Browse” button
  3. Select the template file you downloaded in step 1. It will usually be called tpl_it_NAME.zip
  4. Click on the “Upload & Install” button

Gantry5 Framework update

This is just a simple one click task. If there is a newer version of the Gantry Framework released you will notice that in your Joomla Admin as well as in the Template Manager. Then just click on the button.

You might also want to read the “Updating” and “Updating Themes” chapters in the Gantry5 Documentation.

Gantry 5 Basics

Please have a look at the Gantry Documentation in order to discover what Gantry is all about, the core-concepts behind it, and how to get started with this next-generation framework.

You do need to read the Gantry Documentation in order to be able to setup and configure our templates on your website.

The most important things you need to know when working with our Gantry5-based templates are:

  • The Layout Manager is used mostly for creating your module positions. Apart from the module positions, you should also keep the static content in the Layout Manager. By “static content” we mean the “Logo” particle, the “Menu” particle, the “System Messages” particle, the “Page Content” particle, the “To Top” particle and the “Mobile Menu” particle.
  • If you want to hide some modules/elements on some devices (phones, tablets, etc) you should use the hidden-phone, hidden-tablet, etc. classes but you should add them in the particular module positions (under the “Block” tab) in the Layout Manager, rather then in the “Module Class Suffix” field for the particular module. You will find more details in the “Layout Manager” chapter in the Gantry Documentation.
  • As mentioned above, you create your module positions in the Layout Manager, but then you will use the Module Manager to assign your modules, as you would do in any other framework as well as in the default Joomla!
  • In order to publish the custom particles that come with the template you will use the “Gantry5 Particle” module in the Module Manager, rather than adding them directly in the Layout Manager.
  • If you want to change the style of some sections (background color, background image, text color, etc.) globally, for the whole website, you should do it under the “Styles” tab in the “Base” outline. The “Base” outline holds the defaults for the whole website. You can then override those defaults in each outline you create.
  • If you want to load an asset (JS, CSS, etc.) globally in the whole website, you can do it under the “Page Settings” tab in the “Base” outline.
  • If you want to create an empty page so you can assign modules to it, you will use the “Gantry5 Themes” -> “Custom Page” menu item type. Previously, you would use the “Featured Items” menu item type.

Required Atoms

Please have a look at the Atoms sections in the Gantry Documentation so you know what they are all about.

Atoms basically load assets (scripts and stylesheets).

Particles

Gantry5 comes with a brand new Particle system which makes it easy to create, configure, and manage content blocks.

Basically, everything that you would create a Custom HTML module for is now coded in to a particle. You no longer need to copy/paste long HTML codes and edit them, you just need to click here and there and fill out fields in the Admin.

In this chapter we will show you the custom particles that we developed as well as some of the core Gantry 5 particles that we modified and enhanced, for example the “Social” particle.

For more information about the core Gantry5 particles, please have a look at the “Particles” chapter in the Gantry5 Documentation.

Ifolio Template Particles

Ifolio Template Atom

Core Gantry5 Particles

Build Demo Pages

This section will help you understand about the Demo pages for Ifolio. How to design, reuse the content from quickstart package. Instead of starting from scratch, use our pre-designed pages to jumpstart your design process or get inspired.
Base Outline

This page will acts as the global default for any gantry pages. This is where global style, particle defaults, page settings, and layout options are set. For more information, please take a look at Gantry 5 Inheritance. To edit this page, go to Outline -> Base Outline -> Layout Tab

1. Changing the Top Section

The Top Section contains iFolio – Creative Portfolio Template (Custom HTML Particles), Horizontal Menu Particles.

1.1 Changing the Creative Portfolio Template (Custom HTML Particles)

To edit the Custom HTML particle, click the Custom HTML particle icon settings.

1.2 Changing the Horizontal Menu Particles

To edit the Horizontal Menu particle, click the Horizontal Menu particle icon settings.

2. Changing the Above Footer Section

The Above Footer Section contains Module Position – Subscribe.

2.1 Changing the Module Position – Subscribe

This module position creates position subscribe and is assigned with module “subscribe”. To edit the position name, click the module position particle icon settings. Edit position name on the key field. For more information about Module position, please take a look at Gantry 5 positions document

To select which module appears in this place. Go to Extensions -> Modules, select your modules you wish to display, then switch position to the name of module positions, then save it.

3. Changing the Fixedside Section

The Fixedside Section contains 4 rows, row 1 Logo Particles, row 2 Social Particles, row 3 Module Position – Fixedside, row 4 Contact Info (Custom HTML Particles).

4.1 Changing the Logo Particles

You will need to change the logo, that’s for sure. You can do that easily by editting the settings of the “Logo” particle:

Click the logo particle icon settings and do following

4.2 Changing the Social Particles

To edit the Social particle, click the Social particle icon settings.

4.3 Changing the Module Position – Fixedside

This module position creates position fixedside and is assigned with module “fixedside”. To edit the position name, click the module position particle icon settings. Edit position name on the key field. For more information about Module position, please take a look at Gantry 5 positions document

To select which module appears in this place. Go to Extensions -> Modules, select your modules you wish to display, then switch position to the name of module positions, then save it.

4.4 Changing the Contact Info (Custom HTML Particles)

To edit the Custom HTML particle, click the Custom HTML particle icon settings.

4. Changing the Footer Section

The Footer Section contains Coppyright (Cusotm HTML Particles) and Social Particles.

5.1 Changing the Coppyright (Cusotm HTML Particles)

To edit the Custom HTML particle, click the Custom HTML particle icon settings.

5.2 Changing the Social Particles

To edit the Social particle, click the Social particle icon settings.

5. Changing the Offcanvas Section

The Offcanvas Section contains Mobile-menu Particles.

6.1 Changing the Mobile-menu Particles

The Offcanvas Section contains Mobile-menu Particles.

Home Page

This outline is assigned to Main Menu -> Home. If you want to edit the assignments and move it to another menu, please select menu from the outline list then switch to Assignments tab. You can assign this outline to whatever menu you want, then click the save assignments button.

Home Layout

2. Changing the Top section

The Top section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 1 above to edit the Top. If you want to edit for only Home page, remove the inheritance then edit it like Base Outline -> Section 1 above.

2. Changing the Slideshow section

The Slideshow Section contains Module Position – Slideshow.

2.1 Changing the Module Position – Slideshow

This module position creates position Slideshow and is assigned with module “Slideshow”. To edit the position name, click the module position particle icon settings. Edit position name on the key field. For more information about Module position, please take a look at Gantry 5 positions document

To select which module appears in this place. Go to Extensions -> Modules, select your modules you wish to display, then switch position to the name of module positions, then save it.

3. Changing the Intro section

The Intro Section contains 2 rows, row 1 Heading Particles, row 2 Lightgallery Particles.

3.1 Changing the Heading Particles

To edit the heading, click the heading particle icon settings. For more detail about heading particle, please take a look at Heading Particles Documentation

3.2 Changing the Lightgallery Particles

To edit the Lightgallery, click the Lightgallery particle icon settings. For more detail about Lightgallery particle, please take a look at Lightgallery Particles Documentation

4. Changing the Features section

The Features Section contains Featurebox Particles.

4.1 Changing the Featurebox Particles

To edit the Featurebox particle, click the Featurebox particle icon settings. For more detail about Featurebox particle, please take a look at Featurebox documentation

5. Changing the Testimonials section

The Testimonials Section contains Testimonial Particles.

5.1 Changing the Testimonial Particles

To edit the testimonial, click the testimonial particle icon settings. For more detail about testimonial particle, please take a look at Testimonial Particles Documentation

6. Changing the Blog section

The Blog Section contains Module Position – Blog.

6.1 Changing the Module Position – Blog

This module position creates position blog and is assigned with module “blog”. To edit the position name, click the module position particle icon settings. Edit position name on the key field. For more information about Module position, please take a look at Gantry 5 positions document

To select which module appears in this place. Go to Extensions -> Modules, select your modules you wish to display, then switch position to the name of module positions, then save it.

7. Changing the Bottom section

The Bottom Section contains Calltoaction Particles.

7.1 Changing the Calltoaction

To edit the Calltoaction particle, click the Calltoaction particle icon settings.

8. Changing the Above Footer section

The Above Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 2 above to edit Above Footer. If you want to edit for only Home page, remove the inheritance then edit it like Base Outline -> Section 2 above.

9. Changing the Fixedside section

The Fixedside section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 3 above to edit Fixedside. If you want to edit for only Home page, remove the inheritance then edit it like Base Outline -> Section 3 above.

10. Changing the Footer section

The Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 4 above to edit Footer. If you want to edit for only Home page, remove the inheritance then edit it like Base Outline -> Section 4 above.

11. Changing the Offcanvas section

The Offcanvas section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 5 above to edit Offcanvas. If you want to edit for only Home page, remove the inheritance then edit it like Base Outline -> Section 5 above.

About Page

This outline is assigned to Main Menu -> About. If you want to edit the assignments and move it to another menu, please select About from the outline list then switch to Assignments tab. You can assign this outline to whatever menu you want, then click the save assignments button.

About Layout

2. Changing the Top section

The Top section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 1 above to edit the Top. If you want to edit for only About page, remove the inheritance then edit it like Base Outline -> Section 1 above.

2. Changing the Slideshow section

The Slideshow Section contains Vimeo video (Custom HTML Particles).

2.1 Changing the Vimeo video (Custom HTML Particles

To edit the Custom HTML particle, click the Custom HTML particle icon settings.

3. Changing the Intro section

The Intro Section contains 2 rows, row 1 Heading Particles, row 2 Member Particles.

3.1 Changing the Heading Particles

To edit the heading, click the heading particle icon settings. For more detail about heading particle, please take a look at Heading Particles Documentation

3.2 Changing the Lightgallery Particles

To edit the Member, click the Member particle icon settings. For more detail about Member particle, please take a look at Member Particles Documentation

4. Changing the Features section

The Features section inherited from Home so it copies particles and settings from Home. If you want to edit this section for all pages, please go to Home -> Section 4 above to edit Features. If you want to edit for only Home page, remove the inheritance then edit it like Home -> Section 4 above.

5. Changing the Testimonials section

The Testimonials section inherited from Home so it copies particles and settings from Home. If you want to edit this section for all pages, please go to Home -> Section 5 above to edit Testimonials. If you want to edit for only About page, remove the inheritance then edit it like Home -> Section 5 above.

6. Changing the Blog section

The Blog section inherited from Home so it copies particles and settings from Home. If you want to edit this section for all pages, please go to Home -> Section 6 above to edit Blog. If you want to edit for only About page, remove the inheritance then edit it like Home -> Section 6 above.

7. Changing the Bottom section

The Bottom section inherited from Home so it copies particles and settings from Home. If you want to edit this section for all pages, please go to Home -> Section 7 above to edit Bottom. If you want to edit for only About page, remove the inheritance then edit it like Home -> Section 7 above.

8. Changing the Above Footer section

The Above Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 2 above to edit Above Footer. If you want to edit for only About page, remove the inheritance then edit it like Base Outline -> Section 2 above.

9. Changing the Fixedside section

The Fixedside section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 3 above to edit Fixedside. If you want to edit for only About page, remove the inheritance then edit it like Base Outline -> Section 3 above.

10. Changing the Footer section

The Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 4 above to edit Footer. If you want to edit for only About page, remove the inheritance then edit it like Base Outline -> Section 4 above.

11. Changing the Offcanvas section

The Offcanvas section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 5 above to edit Offcanvas. If you want to edit for only About page, remove the inheritance then edit it like Base Outline -> Section 5 above.

Portfolio Page

This outline is assigned to Main Menu -> Portfolio. If you want to edit the assignments and move it to another menu, please select Portfolio from the outline list then switch to Assignments tab. You can assign this outline to whatever menu you want, then click the save assignments button.

Portfolio Layout

1. Changing the Top section

The Top section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 1 above to edit the Top. If you want to edit for only About page, remove the inheritance then edit it like Base Outline -> Section 1 above.

2. Changing the Intro section

The Intro section inherited from Home so it copies particles and settings from Home. If you want to edit this section for all pages, please go to Home -> Section 2 above to edit the Intro. If you want to edit for only About page, remove the inheritance then edit it like Home -> Section 2 above.

3. Changing the Bottom section

The Bottom section inherited from Home so it copies particles and settings from Home. If you want to edit this section for all pages, please go to Home -> Section 7 above to edit Bottom. If you want to edit for only About page, remove the inheritance then edit it like Home -> Section 7 above.

4. Changing the Above Footer section

The Above Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 2 above to edit Above Footer. If you want to edit for only About page, remove the inheritance then edit it like Base Outline -> Section 2 above.

5. Changing the Fixedside section

The Fixedside section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 3 above to edit Fixedside. If you want to edit for only About page, remove the inheritance then edit it like Base Outline -> Section 3 above.

6. Changing the Footer section

The Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 4 above to edit Footer. If you want to edit for only About page, remove the inheritance then edit it like Base Outline -> Section 4 above.

7. Changing the Offcanvas section

The Offcanvas section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 5 above to edit Offcanvas. If you want to edit for only About page, remove the inheritance then edit it like Base Outline -> Section 5 above.

Coming Soon Page

This outline is assigned to Main Menu -> Page -> Coming Soon. If you want to edit the assignments and move it to another menu, please select Coming Soon from the outline list then switch to Assignments tab. You can assign this outline to whatever menu you want, then click the save assignments button.

Coming Soon Layout

2. Changing the Top section

The Top section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 1 above to edit the Top. If you want to edit for only Coming Soon page, remove the inheritance then edit it like Base Outline -> Section 1 above.

2. Changing the Intro section

The Intro Section contains 2 rows, row 1 Countdown Particles, row 2 We are working … (Custom HTML Particles).

2.1 Changing the Countdown Particles

To edit the Countdown particle, click the Countdown particle icon settings. For more detail about Countdown particle, please take a look at Countdown documentation

2.2 Changing the We are working … (Custom HTML Particles)

To edit the Custom HTML particle, click the Custom HTML particle icon settings.

3. Changing the Above Footer section

The Above Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 2 above to edit Above Footer. If you want to edit for only Coming Soon page, remove the inheritance then edit it like Base Outline -> Section 2 above.

4. Changing the Fixedside section

The Fixedside section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 3 above to edit Fixedside. If you want to edit for only Coming Soon page, remove the inheritance then edit it like Base Outline -> Section 3 above.

5. Changing the Footer section

The Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 4 above to edit Footer. If you want to edit for only Coming Soon page, remove the inheritance then edit it like Base Outline -> Section 4 above.

6. Changing the Offcanvas section

The Offcanvas section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 5 above to edit Offcanvas. If you want to edit for only Coming Soon page, remove the inheritance then edit it like Base Outline -> Section 5 above.

Contact Page

This outline is assigned to Main Menu -> Page -> Contact. If you want to edit the assignments and move it to another menu, please select Contact from the outline list then switch to Assignments tab. You can assign this outline to whatever menu you want, then click the save assignments button.

Contact Layout

2. Changing the Top section

The Top section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 1 above to edit the Top. If you want to edit for only Contact page, remove the inheritance then edit it like Base Outline -> Section 1 above.

2. Changing the Slideshow section

The Slideshow Section contains Google Maps (Custom HTML Particles).

2.1 Changing the Google Maps (Custom HTML Particles

To edit the Custom HTML particle, click the Custom HTML particle icon settings.

3. Changing the Intro section

The Intro Section contains 2 rows, row 1 Contact Heading (Custom HTML Particles), row 2 Module Position – Contact Form.

3.1 Changing the Contact Heading (Custom HTML Particles)

To edit the Custom HTML particle, click the Custom HTML particle icon settings.

3.2 Changing the Module Position – Contact Form

This module position creates position contact-form and is assigned with module “contact-form”. To edit the position name, click the module position particle icon settings. Edit position name on the key field. For more information about Module position, please take a look at Gantry 5 positions document

To select which module appears in this place. Go to Extensions -> Modules, select your modules you wish to display, then switch position to the name of module positions, then save it.

4. Changing the Above Footer section

The Above Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 2 above to edit Above Footer. If you want to edit for only Contact page, remove the inheritance then edit it like Base Outline -> Section 2 above.

5. Changing the Fixedside section

The Fixedside section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 3 above to edit Fixedside. If you want to edit for only Contact page, remove the inheritance then edit it like Base Outline -> Section 3 above.

6. Changing the Footer section

The Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 4 above to edit Footer. If you want to edit for only Contact page, remove the inheritance then edit it like Base Outline -> Section 4 above.

7. Changing the Offcanvas section

The Offcanvas section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 5 above to edit Offcanvas. If you want to edit for only Contact page, remove the inheritance then edit it like Base Outline -> Section 5 above.

Services Page

This outline is assigned to Main Menu -> Services. If you want to edit the assignments and move it to another menu, please select Services from the outline list then switch to Assignments tab. You can assign this outline to whatever menu you want, then click the save assignments button.

Services Layout

1. Changing the Top section

The Top section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 1 above to edit the Top. If you want to edit for only Services page, remove the inheritance then edit it like Base Outline -> Section 1 above.

2. Changing the Slideshow section

The Slideshow Section contains Beautifuly Minimal … (Custom HTML Particles).

2.1 Changing the Beautifuly Minimal … (Custom HTML Particles

To edit the Custom HTML particle, click the Custom HTML particle icon settings.

3. Changing the Features section

The Features section inherited from Home so it copies particles and settings from Home. If you want to edit this section for all pages, please go to Home -> Section 4 above to edit Features. If you want to edit for only Services page, remove the inheritance then edit it like Home -> Section 4 above.

4. Changing the Bottom section

The Bottom section inherited from Home so it copies particles and settings from Home. If you want to edit this section for all pages, please go to Home -> Section 7 above to edit Bottom. If you want to edit for only Services page, remove the inheritance then edit it like Home -> Section 7 above.

5. Changing the Above Footer section

The Above Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 2 above to edit Above Footer. If you want to edit for only Services page, remove the inheritance then edit it like Base Outline -> Section 2 above.

6. Changing the Fixedside section

The Fixedside section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 3 above to edit Fixedside. If you want to edit for only Services page, remove the inheritance then edit it like Base Outline -> Section 3 above.

7. Changing the Footer section

The Footer section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 4 above to edit Footer. If you want to edit for only Services page, remove the inheritance then edit it like Base Outline -> Section 4 above.

8. Changing the Offcanvas section

The Offcanvas section inherited from base outline so it copies particles and settings from base outline. If you want to edit this section for all pages, please go to Base Outline -> Section 5 above to edit Offcanvas. If you want to edit for only Services page, remove the inheritance then edit it like Base Outline -> Section 5 above.

Positions

JL Ifolio comes with unlimited module positions. Thanks to the awesome Gantry 5 framework you can now easily create as many module positions as you want. You just need to go to the Layout Manager, drag and drop the “Module Position” particle wherever you want it to be and set the module position name.

Learn how to create any positions quickly without coding here.

The best thing you can do (and actually you MUST do) is to install the Quickstart Package and see how everything is configured and what module class suffixes are used for each module.

Customization

All your customization (custom code) should be placed in your “Custom Style Sheet” file. This is the custom.scss file. By default, the custom.scss file does not exists, so you will need to create it. You need to create this file in root/templates/TEMPLATE_NAME/custom/scss. You will find all details in the Gantry5 Documentation, in the “Adding a Custom Style Sheet” chapter.

Extensions

The Web is full of all kinds of different Joomla extensions. Throughout the years we had the chance to work with many extensions from many different providers which helped us to filter the best of best ones. The extensions that we use in our templates have the cleanest code, the best functionality and they’ve been very well supported by their developers.

Below you will find the Download link and the Documentation for each extension (Component, Module, Plugin) that we have used in this template.

If you have any specific request or feedback as well as suggestions, feel free to drop us a line in Ticket System. We’ll try to cover them all.

Let us know in the Ticket System

Comments

Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>